After a long and hard day at work, nothing refreshes you as much as taking a hot bath in your Jacuzzi tub. In fact, you can be sure that after you get out of the tub, you will be feeling totally relaxed, with your spirits at much higher levels that before. There is one, and only one, precondition to this experience i.e. your Jacuzzi tub should be clean. If it is not, you can forget all about the leisure and unwinding. By now, you must have learnt how necessary it is to clean your Jacuzzi tub. In order to help you do the same, we have provided a number of tips below.
Cleaning a Jacuzzi Tub
Items Needed
Powder Cleaner
600-grit Sandpaper
Automotive Paste Wax
Liquid Soap
Soft Cloth
Instructions
First of all, you need to purge the jetted system, in order to get rid of the accumulated bath residue. For the best results, it is advisable to purge the jetted bath after each use.
After you have had a bath and left the jetted bath, do not remove water from the tub. Rather, add some more hot water to bring its level at least 2 inches above the highest jet.
Turn on your Jacuzzi unit, without switching on the aerator. The powder cleaner should be poured near the intake for the circulation pump.
Now, run the bath for 5 to 10 minutes. Thereafter, drain it completely and rinse out any residue.
When the actual tub gets empty, clean it with the help of liquid soap and a soft cloth. Always use a cleaner that is safe for acrylic surfaces.
You can remove minor scratches from the tub by wet sanding the area with 600 grit sand paper.
Finally, use the automotive paste wax to restore glossy finish to the Jacuzzi tub. Your bath is as clean as ever.
